With ClockingPro, your bird's arrival is recorded when the race sticker code you send reaches the YonaPro clocking server. ClockingPro sends it digitally over the internet, not by SMS, so there is no wait for a text message to be delivered. The few seconds between the bird landing and your clock arriving can still decide the result, so it pays to be ready before the first bird is due. This guide walks through the whole process.
Before race day
1. Check your club and number. Open Settings or Manage Clubs and make sure the club you are racing with is your active club. Then make sure the mobile number registered with that club is linked to your account. A clock sent from an unregistered number may be rejected.
2. Check your connection. Digital clocking needs Wi-Fi or mobile data. Make sure your phone (or watch) has a working connection where you'll be when the birds arrive.
3. Check your credits. Each clock and command uses credits. Look at your wallet balance the day before and top up on clocking.pro if you need to. Verification of a top-up is not instant, so don't leave it to race morning.
4. Send a test. Use the
Test command to confirm your club answers. If the test fails, contact your club or
support before the race, not during it.
5. Know the release and cutoff. Use the Release and Cutoff commands so you know when birds were liberated and when clocking closes for the day.
When your bird arrives
6. Take the sticker. Handle the bird calmly and remove the race sticker as your club's rules require. Keep the sticker, because you may need to show it later.
7. Open Clock. On your phone or watch, open the Clock page. Confirm the active club and mobile number shown at the top.
8. Enter the code. Scan the barcode with the camera (the fastest and most accurate method), tap the microphone and read the code aloud, or type it. Check the digits on screen against the printed code.
9. Send and read the response. Tap send once. The clock goes to every club you have enabled, and repeat taps are ignored while it is sending. The club's response appears on screen. A successful response normally confirms the sticker and the time received. If it says the code is invalid, duplicated or not registered, check the code and send again, or contact your organizer.
After the race
Your Clock history keeps every clock with the time sent and the club's response. Use it to compare with your club's official results using the Results command. If something doesn't match, your history is the first thing your organizer or our support team will ask about.
Common mistakes to avoid
- Clocking to the wrong club because another club was left active
- Sending from a mobile number that is not registered with the club
- Typing a digit wrong under pressure (scanning avoids this)
- Running out of credits on race day
- Clocking after the cutoff time
Want to understand how the arrival time turns into a ranking? Read how pigeon race clocking works.